FAQ No. FAQ00849
Can a single
K7L Liquid Leakage Amplifier be used to detect
leakage at multiple locations?
Yes. If Terminal Blocks are used to connect Sensing Bands in
parallel, leakage can be detected in more than one place with only one K7L
If there is a leak in this case, the K7L does not indicate which Sensing
Band detected the leak.
Note 1: When wiring, be sure not to exceed
the maximum possible wiring distances for both the connecting cable and
the Sensing Band. Exceeding these distances may lead to faulty operation.
Connect one Sensing Band to each Terminal Block.
Note 2: This configuration cannot be used with the K7L-AT50D.
Other Level Controller
Which 61F Controller is best to use for a PLC input? Pump control is being performed by the PLC.
Why is the long common electrode always grounded in the 61F Controllerfs connection diagrams?
Can a 61F-GPN-V50 Leak Detector and Electrode be used as a set?