FAQ No. FAQ01111
Question
What cables are used to connect the
CX-Simulator to an OMRON Programmable Terminal to operate the Programmable
Terminal?
Answer
The Programmable Terminal's pin allocation is the same as a Programmable
Controller's pin allocation, so use the same cable that is used to connect
the computer to a Programmable Controller.
The following tables show the cables that can be used.
Cables for Touch Panels with a 9-pin Connector
|
IBM PC/AT or
compatible |
XW2Z-200S-V/500S-V |
|
PC98
computer, 25-pin |
XW2Z-200S/500S |
|
PC98
computer, Half-pitch 14-pin |
XW2Z-200S/500S + XW2Z-S001 |
Cables for Touch Panels with a 25-pin Connector
|
IBM PC/AT or
compatible |
XW2Z-200P-V/500P-V |
|
PC98
computer, 25-pin |
XW2Z-200P/500P |
|
PC98
computer, Half-pitch 14-pin |
XW2Z-200P/500P + XW2Z-S001 |
Note: Refer to
XW2Z Screw Terminal Block Cables for
details.
Other Programmable Terminal
FAQs
 What Programmable Terminals can be used with the NT Support Tool?
Is the NT Support Tool compatible with Windows 2000 or XP? How compatible is it with older versions of Windows?
Which cable can I use to transfer the screen data or system program?
| 
Sitemap
