FAQ No. FAQ02616
Question
Which cable can I use to transfer the
screen data or system program?
Answer
1. IBM PC/AT or Compatible (Including NEC
PC-98NX)
Method 1: Use the XW2Z-S002 (cable length: 2 m)
Male D-sub 9-pin and Female D-sub 9-pin
Method 2: Use the CV500-CN228 (cable length: 2 m) and a commercially
available adaptor for a PC-980-series computer and IBM PC/AT or
compatible.
2. PC-980-series
Computers (Except NX)
(1) Half-pitch 14-pin Computer Port
Use the CV500-CN228 (cable length: 2 m) and the XW2Z-S001 (Conversion
Cable) or a commercially available PC-9800-series computer half-pitch
14-pin/D-sub 25-pin adapter.
(2) D-sub 25-pin Computer Port
Use the CV500-CN228 (cable length: 2 m).
Reference:
CV500-CN228 Specifications
Male D-sub 9-pin and Male D-sub 25-pin
For PC-9800-series computers except NX
XW2Z-S001 Specifications
Female D-sub 25-pin and Male half-pitch 14-pin
For PC-9800-series notebook computers except NX
Regardless of the type of Support Software (NS-Designer, NT-series Support
Tool, etc), the above cables/adapters can be combined and used. (The
screen design software may be for the IBM PC/AT or compatible machines or
PC-9800-series computer.)
Others:
If the cable specifications are different, a timeout error may be
displayed on the computer or it may require a long time to transfer data,
or transfer may cease halfway. Refer to the appendix of the support
software operation manual for the internal wiring of cables. The cables
that connect the Programmable Terminals and host Programmable Controller
have different wiring.
Other Programmable Terminal
FAQs
 How can the NT system program be reinstalled?
| 
Sitemap
