OMRON IA Global
Find out information related to Displacement / Measurement Sensors.
RoHS Compliant Status
Discontinuation and Replacement
View frequently asked questions in your country.
Can the ZX-L measure transparent objects?
What is the maximum length that the cable for ZX-L can be extended?
The threshold value cannot be set. What is causing this, and what can be done to resolve it?
How many times can the zero reset be used?
Can Sensor Heads with different measurement distances be used for calculations between adjacent Sensors?
What is displayed on the resolution display of channel 1 and channel 2 when performing calculations for adjacent Sensors?
How many Sensors can be connected when performing calculations for adjacent Sensors?
For what applications are the Reflective Line Beam Sensors most useful?
The Smart Monitor does not start properly. What is causing this, and what can be done to resolve it?
Is the timer function valid for all the HIGH, PASS, and LOW judgment outputs?
What is average processing (moving average)?
Is there a way to detect the deterioration of the LD laser diode?
How far away must surrounding objects be for them not to affect the E4PA?
What is the service life of the LD laser diode?
Are there RS-232C cross cables for which operation has been verified?
How far should E4PA Sensors be separated from each other?
What is the most effective type of reflection for a given sensing object?
The E4PA A1 (power indicator, green LED) and A2 (error indicator, red LED) indicators flash alternately and the E4PA is not operating properly. What is causing this, and what can we do to resolve the problem?
How are the gain switch functions AUTO, METAL, WHITE, and BLACK used in a Reflective Sensor?
What is the chemical resistance of the E4PA?
At the maximum sensing distance of the E4PA, the output should be 20 mA but only 16 mA is output. What is causing this?
How much does wind affect the E4PA?
What is the principle of regular reflection measurements?
What is the principle of diffuse reflective measurements?
Are there any precautions for using the E4PA to detect the liquid level in a tank?
Does the temperature of the sensing object affect the detection ability of the E4PA?
What is resolution?
Can the Actuatorfs Measurement Head of the D5V be replaced?
When a command was sent using the Z300 serial communications output, an error was returned. Why is this?
How big does the slit have to be if an object is measured through a slit with an Optical Displacement Sensor?
Can the Z500/Z550 be used to measure the thickness of an object by connecting two Sensor Heads?
How can I change the analog output of 4 to 20 mA to 1 to 5 V?
What is the service life of the Z300?
What problems occur when measuring hot objects with the Z300?
What is the width resolution of the Z500?