SYSMAC CP1H Programmable Controller

Differential Phases for Four Axes Are Standard.

Easily Handles Multi-axis Control with a Single Unit.

  • Main-axis Control for Equipment Such as Textile Machinery or Spinning Machinery  

  • Positioning Conveyance for Equipment Such as Building Material Manufacturing Machinery and

     Stone-cutting Machinery 

Up to Eight Interrupt Inputs Can Be Used

Eight interrupt inputs are built in. Quick-response inputs for pulse widths of 50 µs.

The interrupt inputs can also be used as single-phase counters. (Response frequency: 5 kHz total for 8 inputs)

Faster Instruction Process Time

Compared with the CPM2A, basic instructions are processed at least six times faster and MOV instructions are process 26 times faster.

Processing has been speeded up for not only basic instructions but for special instructions as well. Faster processing of approximately 400 instructions helps to speed up the entire system.

Four Input Words and Two Output Words for XA CPU Units.

Analog Control and Monitoring with Only a Single CPU Unit.

  • Surface Inspections Using Inspection Devices  

  • Mechanisms to Prevent Careless Mistakes in Cell Production (Such as Forgetting to Tighten Screws)

  • Oil Pressure Control in Forming Machines

A Standard USB Port and Two Serial Ports Enable Connections  and Communications with a Wide Range of Components

Modbus-RTU Easy Master

Connecting Inverter Speed Control Is Made Simple Using the Modbus-RTU Easy Master.
When the address, function, and data for a slave device are preset in a fixed memory area (DM Area), a message can be sent or received simply by turning ON an AR Area bit (A640.00 for port 1 or A641.00 for port 2) in the PLC.

Serial PLC Links

When multiple boilers are being controlled, up to 10 words/Unit of data for settings and monitoring can be exchanged using data links between up to nine CP1H (or CJ1M) CPU Units. PLC Links can be used with either serial port 1 or serial port 2.

Flexibly Adjust the System Configuration to the Application by Adding Up to 7 CPM-series Expansion I/O Units, Expanding Functionality, and Connecting to Networks.

Easy Maintenance and Startup Adjustments with LCD Displays and Settings     New! 

Attach an LCD Option Board to the CPU Unit to easily monitor or change data values in the PLC to visually check error status.

Handy Built-in Functions Make Maintenance Easier

Analog Inputs Are Made Simple

An analog adjustment and an external analog setting input connector are provided.

Status Displayed on 7-segment Display

• The 7-segment display provides two display digits.

• In addition to displaying error codes for errors detected by the PLC, codes can be displayed on the display from the ladder program.

• The 7-segment display is useful for maintenance as well, allowing problems that arise during system operation to be grasped without using any Support Software.