* Ordering information
* Dimensions, and etc
can be found in our PDF brochure.
Versatile, Cost-effective EtherNet/IP
Slave Adapter for CP1 Series Micro PLCs
This advanced communications adapter
provides versatility by being able to program the CP1L/H over Ethernet
and simultaneously being able to communicate with an HMI and/or SCADA
software system to the same CP1L/H.
Easy Mounting - The adapter mounts in an
unused Option Board Slot of the CP1 PLC
Slave connections – The CP1W-EIP61
turns a CP1 PLC into an Intelligent EtherNet/IP Slave that shares
information using Data Link (Implicit Messaging). The CP1 must be
connected to an EtherNet/IP Master for data sharing.
Intelligent Slave – Each PLC is a powerful
motion controller* (CP1H - 4 Axis, CP1L – 2 Axis) with high speed
interrupts, Real Time Clock, IEC61131-3 Programming, PID, Floating Point
Math and is expandable with analog or digital I/O. The addition of an
EtherNet/IP option board turns the PLC into an Intelligent Slave.
ControlLogix & CompactLogix Connect –
Easily connect Rockwell EtherNet/IP Master to the CP1 with EtherNet/IP
Inquire About CP1 EtherNet/IP Adapter