|
|
 |
 |
|
Product Index ::
Automation Systems
:: Programmable Controllers ::
PLC-Based Process Controllers
|
|
CS1W-LC001 Loop Control Unit
|
|
![CS1W-LCB[]1 Inner Board / CS1W-LC001 Loop Control Unit](CS1W-LC_progctrlr_small.jpg)
|
|
* Ordering information
* Specifications
* Configurations
* Dimensions, and etc
|
|
can be found in our PDF brochure.
|
|
Fully Integrated Sequence
and Process Control for the Ideal Control System for Every Application
DCS functionality in a PLC.
Analog Units with signal conversion
functions.
A scaleable system configuration.
Function block programming.
Sequence programming using either step
ladders or sequence tables.
A direct link to HMI products.
Duplex operation supported.
Complete maintenance functions.
|
|
Features |
|
Down-Sizing
Cut cost, Save space,
Reduce labor
PLCs provide the same functionality and
performance as DCS while also providing the advanced features of PLCs:
Open specs, easy maintenance, and cost performance. A wide range of
Isolated-type Analog Units helps to save space and greatly reduces system
costs.
Consolidate the functions
of many controllers
Programming is as simple as combining the
function blocks required by the application. To increase the number of
controlled loops, just add them to the program. HMI windows can also be
created easily using a wide range of utility software.
|
|
Easy Engineering
Engineering is simple when
you can program with function blocks
Paste function blocks in a window just like
you were creating a flow sheet, and then connect the blocks with the mouse
to graphically program a wide range of process control. And with a PLC,
it's easy to incorporate general-purpose HMI devices and
software (such as touch panels and SCADA software).
Advanced controller
functions are built into the CS1 PLCs. No programming is
required for communications.
The Loop Control Boards and Units were
designed for the CS1 PLCs and require no communications programming.
High-speed, flexible data links can be created with the PLC to increase
control performance.
Control can be tuned as
required
The CX-Process Tool software provides easy
tuning. Both autotuning and fine tuning functions can be used to quickly
adjust PID constants to the specific application. And function blocks can
be set to a control cycle of as short as 10 ms for efficient control
of flowrates, pressures, and similar applications.
|
|
|
Smart
Products |
|
Loop Control Boards (LCBs) and Loop
Control Units (LCUs)
Packed with complete DCS functionality, the LCBs/LCUs are programmed with
function blocks designed specifically for process control. By combining
function blocks, a wide array of control methods, from basic PID control
to cascade and feed-forward control can be easily configured.
|
|
Process I/O Units
These Analog I/O Units provide the functionality of isolators, power
supplies, signal converters, and other devices. The built-in functions,
such as measurement value alarms, rate-of-change calculations, and square
roots, have enabled major savings in cost and space. High-resolution
Models are also available. By combining the Units, logging/monitoring
systems can be constructed, or the Units can be used together with LCBs/LCUs
to construct complete process control systems. Parameters are set using
Windows-based software that provides either tabular or conversational
input
methods.
|
|
SYSMAC CS1D-series Duplex PLCs
Increase the reliability of
the facilities and devices with a Duplex PLC-based Process Control System
If an error occurs in the active CPU Unit, the standby CPU Unit takes over
in an instant (using the hot standby method) so that system operation
continues essentially unaffected. Other duplex variations are also
possible. For example, instead of duplexing the CPU Unit, Power Supply
Unit, and Controller Link Unit, a system can be constructed
with a Single- CPU Unit and only a duplex Power Supply Unit or only a
duplex Controller Link Unit.
A duplex system means rapid
recovery for errors without stopping system
operation.
Replace Units with power supplied or even while the system is running,
including CPU Units (Duplex-CPU system), Power Supply Units,
Communications Units, Basic I/O Units, and Special I/O Units.
|
|
CX-Process
Increase the reliability of
the facilities and devices with a Duplex PLC-based Process Control System
Paste function blocks in a window just like you were creating a flow
sheet, and then
connect the blocks with the mouse to program graphically. A total of 70
different types of function block are provided for loop control, such as
PID control, segment programming, and square roots.
CX-Process Monitor Plus
This Windows utility is used to download function block data from LCBs/LCUs
and
to monitor the system with control windows (images of the on-site
functions), trend windows, annunciator windows, and more.
By downloading CSV tag data created with CX-Process, window configurations
can be easily produced by simply selecting the desired tags. User-created
applications can also be started up by pressing the Start External
Application button.
|
|
Face Plate Auto-Builder for NS
Engineering steps can be
drastically reduced by combining an LCU/LCB with an
NS-series Programmable Terminal (PT).
-
Automatically Generate Control and Tuning
Windows The software generates NS touch panel screen data from tag
information created on the CX-Process Tool (tag names, tag comments,
scaling, I/O allocations, etc.).
-
There is no need for troublesome
communications address settings on the PT or ladder programming.
-
The generated data can be edited on the
NS-Designer (NS screen creation software) as required.
|
|
Application Examples |
|
|
|
 top |
See Related Products:
|
Programmable
Controller
CS1D
A diverse selection of redundant
systems. Lineup includes Single-CPU Systems and Duplex Ethernet. |
![CS1W-LCB[]1 Inner Board](../thumbnail/CS1W-LCB[]1.jpg)
|
Inner Board
CS1W-LCB[]1
Loop Control Board for fully
integrated sequence and process control. |
|
Support Software
CX-Process Monitor Plus
Support software that monitors and
controls operation of function blocks in loop control units. |
|
|
 |
|
OMRON IA Global
![CS1W-LCB[]1 Inner Board / CS1W-LC001 Loop Control Unit](CS1W-LC_progctrlr.jpg)
