Drive the Laser with an Amplifier the Same
Size as a Digital Fiber Amplifier
E-Con* Connectors make Sensor Heads easier to
One-touch Connector between Sensor Head and Amplifier allows repeated
connection when replacing sensors, when wiring, or during maintenance.
Reduced inconsistencies or mistakes by maintenance staff through simple
connection procedure and reliable contact.
Specifications meets the current standardization trends of FA device and
connector manufacturers. Connection is simple: No special tools are
Clear, large, easy-to-read intelligent display
Two easy-to-read digital displays with large characters
Threshold can be set easily while checking incident light levels.
Dual digital display makes sensitivity adjustments easy.
A variety of display modes to assist settings and operation.
High-speed response (80 Ás: E3C-LDA21/51/7/9)
High-precision mode (long distance, high resolution)
Interference prevention (10 Units: Standard/High-resolution mode. Can be
used together with E3X-DA-S-series Fiber Amplifiers.)
Select 2 outputs or 1 output and 1 input (depending on model).
Differential function and counter function.
Zero reset function and timer function.
Flexible control using a Mobile Console
A Mobile Console can be used for remote operation from the Sensor Head
when the Sensor Head and Amplifier Unit are separated by a considerable
Optimal light level setting and power tuning
function made possible by digital operation
You can easily control settings even when multiple Sensors are used
because the same incident light levels and threshold value settings can be
made for the same application.