Industrial Automation

ZW-SQ Series

Confocal Fiber Displacement Sensor Sensor Head

ZW-SQ Series

Ultra-compact and Ultra-lightweight. Stable Measurements for Any Material

last update: June 1, 2022

Sensor Head

Square straight type

Spot diameter	Static resolution *	Model
18 μm dia.	0.25 μm	ZW-SQ5007 2M
18 μm dia.	0.25 μm	ZW-SQ5007 0.3M
40 μm dia.	0.25 μm	ZW-SQ5020 2M
40 μm dia.	0.25 μm	ZW-SQ5020 0.3M
60 μm dia.	0.25 μm	ZW-SQ5030 2M
60 μm dia.	0.25 μm	ZW-SQ5030 0.3M
80 μm dia.	0.25 μm	ZW-SQ5040 2M
80 μm dia.	0.25 μm	ZW-SQ5040 0.3M

* Values when the sensor controller ZW-5000T is used.

Square Right-angle type

Spot diameter	Static resolution *	Model
18 μm dia.	0.25 μm	ZW-SQR5007 2M
18 μm dia.	0.25 μm	ZW-SQR5007 0.3M
40 μm dia.	0.25 μm	ZW-SQR5020 2M
40 μm dia.	0.25 μm	ZW-SQR5020 0.3M
80 μm dia.	0.25 μm	ZW-SQR5040 2M
80 μm dia.	0.25 μm	ZW-SQR5040 0.3M

* Values when the sensor controller ZW-5000T is used.

Sensor Controller with EtherCAT

Appearance	Power supply	Output type	Model
	24VDC	NPN/PNP	ZW-5000T

Cable

Item	Cable length	Model
Extension Fiber Cable (from Sensor Head to Sensor Controller), (Fiber Adapter ZW-XFC2 is included)	2 m	ZW-XF5002R
	5 m	ZW-XF5005R
	10 m	ZW-XF5010R
	20 m	ZW-XF5020R
	30 m	ZW-XF5030R
Fiber Adapter (used between Sensor Head pre-wired cable and Extension Fiber Cable)	-	ZW-XFC2

Note: Extension Fiber Cable ZW-XF50[][]R can be used with the firmware version 2.100 or later. If you have an old version sensor controller, register as a Sysmac member and download the latest firmware and tools to update your sensor controller. Refer to the Sysmac member registration sheet that is enclosed with the sensor controller for details on member registration and firmware download.

Common cables

Item	Cable length	Model
Parallel caable for ZW-5000T 32-pole (included with Sensor Controller ZW-5000T)	2 m	ZW-XCP2E
RS-232C Cable for personal computer	2 m	ZW-XRS2
RS-232C Cable for PLC/programmable terminal	2 m	ZW-XPT2

Recommended EtherCAT Communications Cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

Cable with Connectors

Item	Recommended manufacturer	Cable length (m) *1	Model
Standard type Cable with Connectors on Both Ends (RJ45/RJ45) Wire Gauge and Number of Pairs: AWG26, 4-pair Cable Cable Sheath material: LSZH 2 Cable color: Yellow 3	OMRON	0.3	XS6W-6LSZH8SS30CM-Y
		0.5	XS6W-6LSZH8SS50CM-Y
		1	XS6W-6LSZH8SS100CM-Y
		2	XS6W-6LSZH8SS200CM-Y
		3	XS6W-6LSZH8SS300CM-Y
		5	XS6W-6LSZH8SS500CM-Y
Rugged type Cable with Connectors on Both Ends (RJ45/RJ45) Wire Gauge and Number of Pairs: AWG22, 2-pair Cable	OMRON	0.3	XS5W-T421-AMD-K
		0.5	XS5W-T421-BMD-K
		1	XS5W-T421-CMD-K
		2	XS5W-T421-DMD-K
		5	XS5W-T421-GMD-K
		10	XS5W-T421-JMD-K
Rugged type Cable with Connectors on Both Ends (M12 Straight/RJ45) Wire Gauge and Number of Pairs: AWG22, 2-pair Cable	OMRON	0.3	XS5W-T421-AMC-K
		0.5	XS5W-T421-BMC-K
		1	XS5W-T421-CMC-K
		2	XS5W-T421-DMC-K
		5	XS5W-T421-GMC-K
		10	XS5W-T421-JMC-K
Rugged type Cable with Connectors on Both Ends (M12 Right-angle/RJ45) Wire Gauge and Number of Pairs: AWG22, 2-pair Cable	OMRON	0.3	XS5W-T422-AMC-K
		0.5	XS5W-T422-BMC-K
		1	XS5W-T422-CMC-K
		2	XS5W-T422-DMC-K
		5	XS5W-T422-GMC-K
		10	XS5W-T422-JMC-K

Note: For details, refer to Cat.No.G019.
*1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20m are available.
Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
*3. Cables colors are available in blue, yellow, or Green

Cables / Connectors

Wire Gauge and Number of Pairs: AWG24, 4-pair Cable

Item	Appearance	Recommended manufacturer	Model
Cables	⎯	Hitachi Metals, Ltd.	NETSTAR-C5E SAB 0.5 × 4P CP *
Cables	⎯	Kuramo Electric Co.	KETH-SB *
RJ45 Connectors	⎯	Panduit Corporation	MPS588-C *

* We recommend to use above cable and connector together.

Wire Gauge and Number of Pairs: AWG22, 2-pair Cable

Item	Appearance	Recommended manufacturer	Model
Cables	⎯	Kuramo Electric Co.	KETH-PSB-OMR *
Cables	⎯	JMACS Japan Co.,Ltd.	PNET/B *
RJ45 Assembly Connector		OMRON	XS6G-T421-1 *

Note: Connect both ends of cable shielded wires to the connector hoods.
* We recommend to use above cable and connector together.

Industrial switching hubs for Ethernet

Appearance	Number of ports	Current consumption	Model
	5	0.07A	W4S1-05D

Note: Industrial switching hubs are cannot be used for EtherCAT.

EtherCAT junction slaves

Appearance	Number of ports	Power supply voltage	Current consumption	Model
	3	20.4 to 28.8 VDC (24 VDC 15 to 20%)	0.08A	GX-JC03
	6	20.4 to 28.8 VDC (24 VDC 15 to 20%)	0.17A	GX-JC06

Note: 1. Please do not connect EtherCAT junction slave with OMRON position control unit, Model CJ1W-NC[]81/[]82.
2. EtherCAT junction slaves cannot be used for EtherNet/IP^TM and Ethernet.

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.
Each model of licenses does not include DVD.

Item	Specifications			Model	Stand- ards
Item		Number of licenses	Media	Model	Stand- ards
Sysmac Studio Standard Edition Ver.1[][] *3	The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCat Slave, and the HMI. Sysmac Studio runs on the following OS. Windows 7 (32-bit/64-bit version)/ Windows 8 (32-bit/64-bit version)/ Windows 8.1 (32-bit/64-bit version)/ Windows 10 (32-bit/64-bit version)/ Windows 11 (64-bit version) *1 This software provides functions of the Measurement Sensor Edition. Refer to your OMRON website for details.	⎯ (Media only)	Sysmac Studio (32bit) DVD	SYSMAC-SE200D	⎯
		⎯ (Media only)	Sysmac Studio (64bit) DVD	SYSMAC-SE200D-64	⎯
		1 license *2	⎯	SYSMAC-SE201L	⎯
Sysmac Studio Measurement Sensor Edition Ver.1.[][]	Sysmac Studio Measurement Sensor Edition is a limited license that provides selected functions required for ZW-series Displacement Sensor settings. Because this product is a license only, you need the Sysmac Standard Edition DVD media to install it.	1 license	⎯	SYSMAC-ME001L	⎯
Sysmac Studio Measurement Sensor Edition Ver.1.[][]		3 license	⎯	SYSMAC-ME003L	⎯

*1. Model "SYSMAC-SE200D-64" runs on Windows 10 (64bit) or higher.
*2. Multiple licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*3. ZW-5000T is supported by Sysmac Studio version 1.18 or higher.

Fiber Cleaner

Item	Recommended manufacturer	Model	Applicable Model	Contacts
Item	Recommended manufacturer	Model	ZW-5000	Contacts
Fiber Connector Cleaner *1	OMRON	ZW-XCL	Yes	OMRON
OPTIPOP R1	NTT Advanced Technology Corporation	ATC-RE-01	Yes (Sensor Head only)	*2

*1. Place orders in units of boxes (contacting 10 units).
*2. Contacts
[Request for an Estimate]
http://www.ntt-at.com/product/optical_cleaner/Distributors.html
[Request for Information]
NTT Advanced Technology Corporation
Muza Kawasaki Central Tower, 1310 Omiya-cho Saiwai-ku, Kawasaki-shi, Kanagawa, 212-0014, Japan
TEL: +81 44 589 5894
http://www.ntt-at.com/product/optical_cleaner/

last update: June 1, 2022

Product Category

Sensors
- Displacement Sensors / Measurement Sensors
  - High Precision Measurement Sensor
    - ZW-8000 / 7000 / 5000 Series
    - ZW-SQ Series
    - ZS Series

Top of page