Page top

page-top

Safety Application Controller Selection Guide

Model

Appearance

Features

Approved Standard No.

Agency

G9SP

Safety Controller

G9SP Safety Controller

• Handles complex safety control
applications with easy programming.

• Create function blocks with applicable Support Software. Also performs simulations.

• Restore design assets with Memory Cards without using a computer.

EN ISO13849-1:2008
EN ISO13849-2:2008
IEC61508 parts 1-7:2010
IEC/EN62061:2005
IEC 61131-2:2007
EN ISO13850:2008
(EN418:1992)
EN 60204-1:2006
EN 61000-6-2:2005
EN 61000-6-4:2007
NFPA 79-2007
ANSI RIA 15.06-1999
ANSI B11.19-2003
UL1998
UL508
CSA22.2 No. 142

• TÜV Rheinland

• UL (cUL)

G9SP Configurator

G9SP Configurator

• This programming software creates
safety circuits for the G9SP.

• Easy system configuration and I/O setup.

• Easy system verification with
simulations.

• Create software objects to greatly
reduce design work.

---

---

G9SX

Flexible Safety Unit

G9SX Flexible Safety Unit

• Logical AND connection enables partial or full control.

• Uses solid-state output (excluding Expansion Units).

• LED indicators provide details of failure diagnosis.

EN50178
ISO13849-1
EN954-1
IEC/EN60204-1
IEC/EN61508
IEC/EN61000-6-2
IEC/EN61000-6-4
UL508
UL1998
NFPA79
CAN/CSA C22.2
No.142

• TÜV SÜD

• UL

• KOSHA

G9SX-GS

Safety Guard Switching Unit

G9SX-GS Safety Guard Switching Unit

• Auto Switching and Manual Switching functions support two types of application.

• External indicator outputs enable indicating the switching status of two safety input devices.

• Auxiliary outputs enable monitoring of safety inputs, safety outputs, and errors.

• Detailed LED indications enable easy diagnosis.

• Logical AND connection allows complicated applications in combination with other G9SX-series Units.

EN50178
IEC/EN60204-1
EN954-1
IEC/EN61508
IEC/EN62061
IEC/EN61000-6-2
IEC/EN61000-6-4
UL508
UL1998
NFPA79
IEC61508
CAN/CSA C22.2
No.142

• TÜV SÜD

• UL (cUL)

• KOSHA

G9SX-SM

Standstill Monitoring Unit

G9SX-SM Standstill Monitoring Unit

• The back electromotive force (BEMF) signal is used to determine when the motor has stopped.

• A standard configuration for standstill detection enables immediate application without setup.

• User configuration to adjust settings for individual machines is also possible.

• Detailed indicator displays for fault diagnosis.

• Certified for Safety Category 4 (EN 954-1), PLe (ISO 13849-1), and SIL3 (IEC/EN 62061).

EN1088
EN50178
IEC/EN60204-1
ISO13849-1
EN954-1
IEC/EN61508
IEC/EN62061
IEC/EN61000-6-2
IEC/EN61000-6-4
UL508
CAN/CSA
C22.2 No.142

• TÜV SÜD

• UL (cUL)

G9SX-LM

Low-speed Monitoring Unit

G9SX-LM Low-speed Monitoring Unit

• Detects the motor speed with a proximity sensor.

• Monitors to see if the motor is below the speed level that has been set for the specific hazard source.

• Enable switch input provided for maintenance work.

• Detailed indicator displays for fault diagnosis.

• Certified for Safety Category 3 (EN 954-1), PLd (ISO 13849-1), and SIL3 (IEC/EN 62061).

EN1088
EN50178
IEC/EN60204-1
ISO13849-1
EN954-1
IEC/EN61508
IEC/EN62061
IEC/EN61000-6-2
IEC/EN61000-6-4
UL508
CAN/CSA
C22.2 No.142

• TÜV SÜD

• UL (cUL)

G9SA

Safety Relay Unit

G9SA Safety Relay Unit

• Compact design.

• Two-hand Controller model available.

• Simple connection of Expansion Unit.

• High-speed 10-ms response.

• Incorporates LED indicators for monitoring built-in relays.

• Finger protection construction.

• 3-pole, 5-pole and Off-delay Units available.

EN60204-1

ISO13849-1
EN954-1
UL508
CSA C22.2
No.14

GB14048.5

• BG

• UL

• CSA

• CQC

G9SB

Safety Relay Unit

G9SB Safety Relay Unit

• Ultra-compact, with models starting at only 17.5 mm wide.

• Can be used with Safety Sensors.

• High-speed 10-ms response.

• Incorporates LED indicators for monitoring built-in relays.

• Finger protection construction.

EN60204-1

ISO13849-1
EN954-1
UL508
CSA C22.2
No.14

GB14048.5

• TÜV Rheinland

• UL

• CSA

• CQC

F3SP-B1P

Control Unit for Safety Sensor

F3SP-B1P Control Unit for Safety Sensor

• Control Unit for F3SN-A, F3SN-B, F3SH-A, F3SR-B and F3SJ-B.

• Plug in light curtain connectors on both sides.

TÜV SÜD and UL certified in a set with F3SN-A, F3SN-B, and F3SH-A.

 

Note:

1: Production of the G9D-EX411 (Expansion Unit) and G9D-301 24V AC/DC Model have been discontinued at the end of March 2006. The recommended substitute will be the G9S-501 24V AC/DC, G9SA-501 24V AC/DC, G9S-301 24V AC/DC and G9SA-301 24V AC/DC Models.

2: For S-mark certified models, refer to the "List of S-mark certified Models".

 

** The safety category refers to the highest applicable category that can be selected when a safety block is created for a control system. It is not the safety category applicable to the safety component itself.