Benefits of... Componet

In electronic parts production, every millisecond counts.

High Performance, Large Capacity

Splitting production machines into logical modules allows easy customization to meet specific end-user demands.

To keep high performance, a fast and easy-to-extend network is required. The efficiency of CompoNet delivers fast cycle times, even when extending the network with repeaters.

Conventional general-purpose field network: 10-100 ms; CompoNet: 1 ms

• Each Master Unit can control up to 2,560 I/O points in up to 384 nodes.

64 word input nodes (1,024 points) or 128 bit input nodes (256 points)

Simple Setting

CompoNet is up and running in minutes. Set the master's mode and baud rate, and the address on each slave. Then plug in and go; no software settings required.

Slaves adjust to the Master's baud rate. Only address setting required. Reduce setting mistakes with CompoNet.

Easy Installation

CompoNet flat cable and isolation-displacement connectors make installation fast and faultless. Power and communications are combined in one cable.

Branch connectors allow you to easily add or remove devices for maintenance and troubleshooting. Repeater Units can link section of different cable types, allowing mixed topology networks.

Alternatively, you can use simple twisted-pair cable and power each node individually.

Wiring with a high degree of freedom

In warehouse automation, efficient wiring saves cost

Flexible Installation and Bit Slave Distribution

Using CompoNet flat cable and repeaters allows easy extensions and changes in network layout. By using repeaters, long branch lines can cover a wide area with less cable.

Easy extension and long branch line.

• Mount them wherever you need them

Conveyor lines require just one or two I/O points every few meters. Dust- and splash-proof IP54 bit slaves allow efficient installation with reduced wiring, directly on the line.

Connection Diagram

Built-in Intelligence

All CompoNet slaves contain early-warning systems that monitor system performance continuously. The transparent CIP communications of CompoNet makes it easy to access the diagnostic data in each device.

Smart Features __________________________________________________

Smart Active Parts are drag-and-drop objects to show slave data on your HMI. CompoNet Support Software is used to set and monitor the network, the Master Unit and Slave Units. Function Blocks for access to maintenance data reduce programming effort.

As time passes, the cylinder is slipping.

Fast Troubleshooting

Indication on the Master Unit helps to quickly assess the network status.

CompoNet Support Software helps you identify wiring errors, power failures or malfunction. By creating network segments separated by repeaters, faults can be isolated to reduce the impact on overall operation.

Extensive Error Detection

Network Isolation

Next >> Omron CompoNet Product Range