Page top

Industrial Automation

Industrial Automation

TZ

High-temperature Basic Switch

TZ

Stable Operation at an Ambient Temperature of 400°C

Ratings

Rated voltage
(V)
Non-inductive load (A) Inductive load (A)
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
125 VAC
250 VAC
1
1
0.9
0.45
0.45
0.3
1
1
1.5
0.45
0.75
0.3
8 VDC
14 VDC
30 VDC
125 VDC
1
1
1
0.4
0.9
0.9
0.9
0.05
0.45
0.45
0.45
0.05
1
1
1
0.4
1.5
1.5
1.5
0.05
1.5
1.5
1.5
0.05

Note: 1. The above current ratings are the values of the steady-state current.
           2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
           3. Lamp load has an inrush current of 10 times the steady-state current.
           4. Motor load has an inrush current of 6 times the steady-state current.
           5. The above ratings are tested under the following conditions.
                 Ambient temperature: 20±2°C
                 Ambient humidity: 65±5%RH
                 Switching frequency: 20 times/min

Characteristics

Operating speed 0.05 mm to 1 m/s * 1
Operating frequency Mechanical 60 operations/min
Electrical 20 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 100 mΩ max. (initial value)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground
and between each terminal and non-current-carrying metal parts
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude * 2
Shock resistance Destruction 500 m/s2 max.
Malfunction 300 m/s2 max. * 1 * 2
Durability Mechanical 100,000 operations min.
Electrical 50,000 operations min.
Degree of protection IP00
Electric shock protection Class I
Ambient operating temperature -65 ° C to 400 ° C (with no icing)
Ambient operating humidity 35% to 85%RH
Weight Approx. 45 to 54 g

*1. This operating speed applies to switches with pin-type pushbuttons.
*2. This refers to a malfunction period of 1 ms max.

Contact Specifications

Contact Specification Rivet
Material Platinum alloy
Gap (standard value) 0.5 mm
Inrush current NC 9 A max.
NO 4.5 A max.