Page top

Industrial Automation

Contact

Industrial Automation

A3P

Lighted Pushbutton Switches

A3P

Large Rectangular-bodied Lighted Pushbutton Switches

Related Contents

last update: April 1, 2024

Approved Standard Ratings

UL (File No. E41515), CSA (File No. LR45258)

Standard Load: 5 A at 125 VAC
                         3 A at 250 VAC
Microload: 0.1 A at 125 VAC
                  0.1 A at 30 VDC
Note: 1. Certification has been obtained for the Switch Unit.
             For detailed information on individual products that have received certification, consult your supplier.
         2. Only Switch output 1c and 2c are certified.

CCC (GB/T14048.5)

Standard Load: 3 A at 250 VAC
                         4 A at 30 VDC
Microload: 0.1 A at 125 VAC
                  0.1 A at 30 VDC
Note: Only Switch output 1c and 2c are certified.

Ratings

Contact Ratings

Silver Alloy Contacts (for Standard Loads)

Rated voltage (V) Non-inductive load (A) Inductive load (A)
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
125 VAC
250 VAC		 5
3		 0.7
0.5		 3
2		 1.3
0.8
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC		 5
5
4
0.4
0.2		 2
2
2
0.05
0.03		 4
4
3
0.4
0.2		 3
3
3
0.05
0.03

Note: 1. The above values are for steady-state currents.
         2. Inductive load: Power factor = 0.4; time constant = 7 ms.
         3. The lamp load has an inrush current of 10 times the steady-state current.
         4. The motor load has an inrush current of 6 times the steady-state current.
Standard testing condition
(1) Ambient temperature: 20 ± 2°C
(2) Ambient humidity: 65 ± 5%RH
(3) Operating frequency: 20 times/min.

Gold Alloy Contacts (for Microloads)

Rated voltage (V) 0.1 A at 30 VDC (resistive load);
0.1 A at 125 VAC (resistive load)
Minimum applicable load 1 mA at 5 VDC

LED Ratings

LED for LED-lighted Models

Single screen

Model A3PJ/M2PJ A3PA/M2PA
Current Current
Applied voltage Rated voltage Red, white Orange Green Red, white Orange Green
5 VDC±5% 5 VDC Approx.
40 mA		 Approx.
20 mA		 Approx.
18 mA		 Approx.
20 mA		 Approx.
10 mA		 Approx.
9 mA
12 VAC/VDC±5% 12 VAC/VDC Approx.
20 mA		 Approx.
10 mA		 Approx.
8 mA		 Approx.
10 mA		 Approx.
5 mA		 Approx.
4 mA
24 VAC/VDC±5% 24 VAC/VDC Approx.
10 mA		 Approx.
5 mA		 Approx.
4 mA		 Approx.
10 mA		 Approx.
5 mA		 Approx.
4 mA

LED Lamp (for LED Lamp-lighted Models)

Type Applied voltage Rated voltage Current Model
DC only 5 VDC ± 5% 5 VDC Approx. 30 mA SLL-05E[]
12 VDC ± 5% 12 VDC Approx. 15 mA SLL-12E[]
24 VDC ± 5% 24 VDC Approx. 12.5 mA SLL-24E[]

• Mis-lighting of the LED
The LED lights with approx. 0.1 mA or less of micro-current. Take a countermeasure like adding a resistor to prevent mis-lighting in parallel to the LED.
The micro-current varies with the machine (leak current or stray capacity between cables, etc.). Select resistance value and allowable power consumption that meet the actual current.

A3P Specifications 13

Characteristics

Operating frequency Mechanical 120 operations/minute max. *1
Electrical 30 operations/minute max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact
resistance		 Standard load 40 mΩ max. (initial value)
Microload 40 mΩ max. (initial value)
Dielectric strength Between terminals of
same polarity		 1,000 VAC, 50/60 Hz for 1 minute *2
Between terminals of
different polarity		 2,000 VAC, 50/60 Hz for 1 minute
Between current-carrying
metal part and ground		 2,000 VAC, 50/60 Hz for 1 minute
Between each terminal
and non-current-carrying
metal part		 2,000 VAC, 50/60 Hz for 1 minute
Between lamp terminals 1,000 VAC, 50/60 Hz for 1 minute *3
Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude (1 ms max.)
Shock resistance Destruction 500 m/s2 max.
Malfunction 200 m/s2 max. (1 ms max.)
Life expectancy Mechanical Momentary operation models: 1,000,000 operations min.
Alternate operation models: 200,000 operations min.
(One operation consists of set and reset operations.)
Electrical 100,000 operations min.
Weight Approx. 30 g
Inrush current NC Silver contact: 10 A max.
NO Silver contact: 10 A max.
Ambient operating temperature LED-lighted models: -10°C to 40°C
(with no icing or condensation)
Ambient operating humidity 35% to 85%RH
Ambient storage temperature -25°C to 65°C
Degree of protection IP40
Electric shock protection class Class II
PTI (proof tracking index) 175
Pollution degree 3 (IEC947-5-1)

*1. With alternate operation models, 60 operations/minute max. One operation cycle consists of set and reset operations.
*2. 600 VAC for microloads.
*3. With no LED lamp mounted.

Operating Characteristics

Model A3PJ series A3PA series A3PT series
Operating Characteristics Momentary operation models Alternate operation models Momentary operation models Alternate operation models Momentary operation models Alternate operation models
Operating force OF max. 5.88 N 6.86 N 5.88 N 6.86 N 3.92 N 4.90 N
Releasing force RF min. 0.39 N 0.29 N 0.39 N 0.29 N 0.39 N 0.29 N
Total travel TT Approx.
3.5 mm		 Approx.
3.5 mm		 Approx.
3.5 mm		 Approx.
3.5 mm		 Approx.
3.5 mm		 Approx.
3.5 mm
Pretravel PT max. 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm
Lock travel alternate LTA min. --- 0.5 mm --- 0.5 mm --- 0.5 mm

last update: April 1, 2024

Product Category

Products

About Us

Solutions

Privacy

Services

Resources

Omron Automation is an industrial automation partner that creates, sells and services fully integrated automation solutions that include sensing, control, safety, vision, motion, robotics and more.

Follow Us

Youtube Facebook Linkedin
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.