Industrial Automation

E3ZS, E3FS

Single-beam Safety Sensor

E3ZS, E3FS

Detects Intrusions into Hazardous Areas with a Single Beam and Complies with International Safety Standards.

last update: September 1, 2016

Sensors

Sensor method	Case material	Sheath material	Connection method	Sensing distance	Output	Model
Through- beam	Polybutylene terephthalate	PVC	Pre-wired cable (2 m)	0.2 to 3 m (Red light)	PNP	E3ZS-T81A
	ABS	PVC	Pre-wired cable (2 m)	10 m (Infrared light)		E3FS-10B4 2M *
	Brass	---	M12 connector	10 m (Infrared light)		E3FS-10B4-M1-M *

* Manufacturing has been discontinued.

Controller

Safety Controller G9SP Series

Name	No. of I/O points				Unit version	Model
Name	Safety inputs	Test outputs	Safety outputs	Standard outputs	Unit version	Model
Safety Controller	10	4	Semiconductor outputs: 4	4	Ver.2.0	G9SP-N10S
	10	6	Semiconductor outputs: 16	---		G9SP-N10D
	20	6	Semiconductor outputs: 8	---		G9SP-N20S

Note: For details, refer to the G9SP Catalog (F090).

Accessories

Branch Connector

Appearance	Model
	F39-CN3

Sensor Mounting Bracket (for E3FS)

Appearance	Model
	Y92E-B18

Sensor Mounting Bracket (for E3ZS)

Appearance	Model
	E39-L104

Mutual Interference Prevention Filter (for E3ZS)

Dimensions	Model	Quantity	Remarks
	E39-E11	2 per Emitter and Receiver (4 total)	For use with E3ZS-T81A. This filter prevents mutual interference by changing the direction of polarized light of the 2 adjacent Emitter/ Receivers. However, when the filter is attached, the maximum sensing distance of the E3ZS is reduced to 1.5 m.

Cables with Connectors (Socket and Plug) on Both Ends (for extension)

Type	Cable connection direction	Cable length L (m)	Model	UL standard
Type	Cable connection direction	Cable length L (m)	DC	UL standard
Fire-retardant, robot cable	Straight/straight	1	XS2W-D421-C81-F	●
		2	XS2W-D421-D81-F
		5	XS2W-D421-G81-F
		10	XS2W-D421-J81-F
	Right angle/right angle	2	XS2W-D422-D81-F
	Right angle/right angle	5	XS2W-D422-G81-F
	Straight/right angle	2	XS2W-D423-D81-F
	Straight/right angle	5	XS2W-D423-G81-F
	Right angle/straight	2	XS2W-D424-D81-F
	Right angle/straight	5	XS2W-D424-G81-F

Note: Extend the cable under the following conditions.
• Overall cable length for both an E3FS Receiver connected to an G9SP and the Emitter connected to the G9SP
must be within 50 m.
• Overall cable length for both an E3ZS Receiver connected to an G9SP and the Emitter connected to the G9SP
must be within 100 m.

Cables with Connector (Socket) on One End (connecting to G9SP)

Type	Cable connection direction	Cable length L (m)	Model	UL standard
Type	Cable connection direction	Cable length L (m)	DC	UL standard
Fire-retardant, robot cable	Straight	1	XS2F-D421-C80-F	●
		2	XS2F-D421-D80-F
		5	XS2F-D421-G80-F
		10	XS2F-D421-J80-F
	Right angle	1	XS2F-D422-C80-F
		2	XS2F-D422-D80-F
		5	XS2F-D422-G80-F
		10	XS2F-D422-J80-F

Connector Plug Assemblies, Solder Type *

Applicable cable diameter (mm)	Cable connection direction	Connection method	Model
3 dia. (3 to 4 dia.)	Straight	Solder	XS2G-D425
3 dia. (3 to 4 dia.)	Right angle	Solder	XS2G-D426

* Use when connecting an E3ZS-T81A or E3FS-10B4 2M to an F39-CN3 Branch Connector.

Connector Plug Assemblies, Screw-on Type *

Applicable cable diameter (mm)	Cable connection direction	Connection method	Model
3 dia. (3 to 4 dia.)	Straight	Screw-on	XS2G-D4S5
3 dia. (3 to 4 dia.)	Right angle	Screw-on	XS2G-D4S6

* Use when connecting an E3ZS-T81A or E3FS-10B4 2M to an F39-CN3 Branch Connector.

last update: September 1, 2016

Product Category

Safety Components
- Safety Sensors
  - E3ZS, E3FS

Top of page