Menu
Industrial Automation
V680S Series
RFID System
3 in 1 RFID: Antenna, Amplifier & Controller
Related Contents
Application Solutions
last update: August 16, 2021
Reader/Writer
| Appearance | Size | Network | Model |
|---|---|---|---|
 |
50 × 50 × 30 mm | EtherNet/IP | V680S-HMD63-EIP |
| PROFINET | V680S-HMD63-PNT | ||
 |
75 × 75 × 40 mm | EtherNet/IP | V680S-HMD64-EIP |
| PROFINET | V680S-HMD64-PNT | ||
 |
120 × 120 × 40 mm | EtherNet/IP | V680S-HMD66-EIP |
| PROFINET | V680S-HMD66-PNT | ||
 |
50 × 50 × 30 mm | Modbus TCP (TCP/IP) | V680S-HMD63-ETN |
 |
75 × 75 × 40 mm | V680S-HMD64-ETN | |
 |
120 × 120 × 40 mm | V680S-HMD66-ETN |
RF Tag
V680S-series
| Type | Memory
capacity |
Appearance | Size | Installation | Model |
|---|---|---|---|---|---|
| Battery-less | 2 K bytes |
 |
40 × 40 × 5 mm | For flush mounting on
metallic surface |
V680S-D2KF67M |
| For flush mounting on
nonmetallic surface |
V680S-D2KF67 | ||||
 |
86 × 54 × 10 mm | For flush mounting on
metallic surface |
V680S-D2KF68M | ||
| For flush mounting on
nonmetallic surface |
V680S-D2KF68 | ||||
| 8 K bytes |
 |
40 × 40 × 5 mm | For flush mounting on
metallic surface |
V680S-D8KF67M * | |
| For flush mounting on
nonmetallic surface |
V680S-D8KF67 * | ||||
 |
86 × 54 × 10 mm | For flush mounting on
metallic surface |
V680S-D8KF68M * | ||
| For flush mounting on
nonmetallic surface |
V680S-D8KF68 * |
* V680S-D8KF6[]M/V680S-D8KF6[] can be used with V680S series Reader/Writer version 2.00 or higher.
V680-series
| Type | Memory
capacity |
Appearance | Size | Installation | Model |
|---|---|---|---|---|---|
| Battery-less | 1 K bytes |
 |
20 dia. × 2.7 mm | For flush mounting on
nonmetallic surface |
V680-D1KP54T |
 |
34 × 34 × 3.5 mm | For flush mounting on
metallic surface |
V680-D1KP66MT | ||
| For flush mounting on
nonmetallic surface |
V680-D1KP66T | ||||
| Environment-
resistant type Battery-less |
 |
95 × 36.5 × 6.5 mm | For flush mounting on
nonmetallic surface |
V680-D1KP66T-SP | |
| High-
temperature type Battery-less |
 |
80 dia. × t10 mm | For mounting with
special attachment |
V680-D1KP58HTN |
Note: V680 series 8K-byte RF Tag can communicate with V680S series Reader/Writer.
For details, contact your OMRON representative.
RF Tag Attachment
| Type | Appearance | Model |
|---|---|---|
| For the V680-D1KP66T |
 |
V600-A86 |
| For the V680-D1KP58HTN |
 |
V680-A80 |
| For the V680-D1KP54T |
 |
V700-A80 |
Connector Cover
Consider using the following components to improve the vibration and impact resistance of the antenna or cable.
| Type | Fixing method | Material | Model | Appearance | Applicable reader/writer |
|---|---|---|---|---|---|
| Standard type | Fixing screws in four
locations, with two locations fixed with reader/writer mounting screws (*1) |
POM | V680S-A63 |  |
V680S-HMD63-ETN |
| V680S-A64 |  |
V680S-HMD64-ETN | |||
| V680S-A66 |  |
V680S-HMD66-ETN | |||
| Slim type | Fixing screws in two
locations (*2) |
PBT | V680S-A63-S |  |
V680S-HMD63-ETN
V680S-HMD63-EIP |
| V680S-A64-S |  |
V680S-HMD64-ETN
V680S-HMD66-ETN V680S-HMD64-EIP V680S-HMD66-EIP |
*1 V680S-A63/A64/A66 includes four mounting holes for fixing.
When mounting with a reader/writer already installed, or when no mounting holes for a new connector cover are
available other than the reader/writer mounting holes, the connector cover can be fixed in two locations with the same
mounting holes used for the reader/writer.
This makes it possible to install the connector cover without the need for additional mounting holes.
When tightening the products together in two locations, use the longer screw for the thicker part of the connector cover
being tightened (thickness: 11.2 mm for V680S-A63, 6 mm for 680S-A64/A66).
*2 In addition to the reader/writer mounting holes, two mounting holes are required for the connector cover.
Note: For assemblies with an antenna, download and review the outline drawings available.
When mounting with a reader/writer already installed, or when no mounting holes for a new connector cover are
available other than the reader/writer mounting holes, the connector cover can be fixed in two locations with the same
mounting holes used for the reader/writer.
This makes it possible to install the connector cover without the need for additional mounting holes.
When tightening the products together in two locations, use the longer screw for the thicker part of the connector cover
being tightened (thickness: 11.2 mm for V680S-A63, 6 mm for 680S-A64/A66).
*2 In addition to the reader/writer mounting holes, two mounting holes are required for the connector cover.
Note: For assemblies with an antenna, download and review the outline drawings available.
Cable
Recommended Ethernet Cable for EtherNet/IP and PROFINET (Connection between Host Device and Reader/Writer)
Use STP (shielded twisted-pair) cable of category 5 or higher.
| Item | Cable length (m) * | Model | |
|---|---|---|---|
| Wire Gauge and
Number of Pairs: AWG22, 2-pair Cable |
Rugged type
Cable with Connectors on Both Ends (M12 Straight/RJ45)  |
0.3 | XS5W-T421-AMC-K |
| 0.5 | XS5W-T421-BMC-K | ||
| 1 | XS5W-T421-CMC-K | ||
| 2 | XS5W-T421-DMC-K | ||
| 5 | XS5W-T421-GMC-K | ||
| 10 | XS5W-T421-JMC-K | ||
| Rugged type
Cable with Connectors on Both Ends (M12 Right-angle/RJ45)  |
0.3 | XS5W-T422-AMC-K | |
| 0.5 | XS5W-T422-BMC-K | ||
| 1 | XS5W-T422-CMC-K | ||
| 2 | XS5W-T422-DMC-K | ||
| 5 | XS5W-T422-GMC-K | ||
| 10 | XS5W-T422-JMC-K | ||
* Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.
Note: For details, refer to the Industrial Ethernet Connectors Catalog (Cat.No.G019).
Recommended Power Cable for EtherNet/IP and PROFINET (Connection between Power Supply and Reader/Writer)
XS5F-D42[]-[]80-[]
| Cable
specifications |
Cable length
L (m) |
Cable outer
diameter (mm) |
Straight Connectors | Angled Connectors | Minimum
order |
|---|---|---|---|---|---|
| Model | |||||
| Fire-retardant,
Robot cable |
1 | 6 | XS5F-D421-C80-F | XS5F-D422-C80-F | 10 |
| 2 | XS5F-D421-D80-F | XS5F-D422-D80-F | 5 | ||
| 3 | XS5F-D421-E80-F | XS5F-D422-E80-F | |||
| 5 | XS5F-D421-G80-F | XS5F-D422-G80-F | |||
| 10 | XS5F-D421-J80-F | XS5F-D422-J80-F | 1 | ||
Note: For details, refer to the Industrial Connectors Catalog (Cat. No. X082).
Cable for Modbus TCP (Connection between Host Device and Reader/Writer)
| Type | Appearance | Length | Model |
|---|---|---|---|
| Special connector --- RJ45 |  |
2 m | V680S-A41 2M |
| 5 m | V680S-A41 5M | ||
| 10 m | V680S-A41 10M | ||
| Special connector --- RJ45
(Flexible cables) |
 |
2 m | V680S-A51 2M |
| 5 m | V680S-A51 5M | ||
| 10 m | V680S-A51 10M | ||
| Special connector --- Loose wires |  |
2 m | V680S-A42 2M |
| 5 m | V680S-A42 5M | ||
| 10 m | V680S-A42 10M |
Extension Cable for Modbus TCP (Connection between Host Device and Reader/Writer)
| Type | Appearance | Length | Model |
|---|---|---|---|
| Special connector --- Special connector |  |
10 m | V680S-A40 10M |
| 20 m | V680S-A40 20M | ||
| 50 m | V680S-A40 50M | ||
| Special connector --- Special connector
(Flexible cables) |
 |
2 m | V680S-A50 2M |
| 10 m | V680S-A50 10M | ||
| 20 m | V680S-A50 20M |
Note: 1. The extension cable can be used for the Reader/Writer for Modbus TCP V680S-HMD6[]-ETN.
2. The cable can be extended up to 60 m by using an extension cable. Only one extension cable can be used.
2. The cable can be extended up to 60 m by using an extension cable. Only one extension cable can be used.
Industrial Switching Hubs (Recommended Hubs)
| Type | Appearance | Functions | No. of ports | Model |
|---|---|---|---|---|
| Industrial Switching Hubs |  |
Quality of Service (QoS):
EtherNet/IP control data priority 10/100BASE-TX, Auto-Negotiation |
5 | W4S1-05D |
last update: August 16, 2021
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.