Industrial Automation

SHL

Enclosed Switch

SHL

Subminiature Enclosed Switch (Measuring 48 x 17.5 x 45 mm) with High Sealing Property

last update: January 21, 2022

Approved Standards

Agency	Standard	File No.	Approved models
UL	UL508	E76675	General-purpose models listed on Data Sheet.
CSA	CSA C22.2 No. 14	LR45746	General-purpose models listed on Data Sheet.
TÜV Rheinland	EN60947-5-1	J50062486	All SHL models listed in this datasheet.
CCC (CQC)	GB/T14048.5	Contact your OMRON representative for details.	Ask your OMRON representative for information on approved models.

Ratings

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC 480 VAC	10 10 2		1.5 1.5 -		3 2 -		2.5 1.5 -
8 VDC 14 VDC 30 VDC 125 VDC 250 VDC	10 10 5 0.4 0.2		2 2 1.5 0.4 0.2		5 5 1.5 0.05 0.03		2 2 1.5 0.05 0.05

	NC	15 A max.
Inrush current	NC	15 A max.
	NO	15 A max.
	NO	15 A max.

Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.

Micro load models

	Resistive load
Rated voltage	Non-inductive load (A)
	NC	NO
125 VAC	0.1
8 VDC 14 VDC 30 VDC	0.1 0.1 0.1

Approved Standard Ratings

TÜV (EN60947-5-1), CCC (GB/T14048.5)

Model	Category and rating	I the
SHL-[]55	AC-15 2 A/125 V DC-12 2 A/48 V	5 A 5 A
SHL-[]55-01	AC-14 0.1 A/125 V DC-12 0.1 A/48 V	0.5 A 0.5 A
SHL-[]55-L	AC-15 2 A/125 V	5 A
SHL-[]55-01L	AC-14 0.1 A/125 V	0.5 A
SHL-[]55-01L2	DC-12 0.1 A/12 V	0.5 A
SHL-[]55-L3	DC-12 2 A/24 V	5 A
SHL-[]55-01L3	DC-12 0.1 A/24 V	0.5 A
SHL-[]55-L4	DC-12 2 A/24 V	5 A
SHL-[]55-01L4	DC-12 0.1 A/24 V	0.5 A
SHL-[]55-L5	DC-12 2 A/48 V	5 A
SHL-[]55-01L5	DC-12 0.1 A/48 V	0.5 A

Note: "AC-15 2 A/125 V" indicates the following.
Application category: AC-16
Rated operating current (Ie): 2 A
Rated operating voltage (Ue): 125 V

UL/CSA

A300

Rated voltage	Carry current	Current (A)		Volt-amperes (V)
Rated voltage	Carry current	Make	Break	Make	Break
120 VAC 240 VAC	10 A	60 30	6 3	7,200	720

Characteristics (For SHL-W155)

*Degree of protections 1**		IP67 (EN60947-5-1)
*Durability 2**	Mechanical	10,000,000 operations min.
*Durability 2**	Electrical	500,000 operations min.
Operating speed		0.1 mm/s to 0.5 m/s (hinge lever models)
Operating frequency	Mechanical	120 operations/min
Operating frequency	Electrical	30 operations/min
Rated frequency		50/60 Hz
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value for the built-in switch when tested alone)
Dielectric strength	Between terminals of the same polarity	1,000 VAC, 50/60 Hz for 1 min
Dielectric strength	Between each terminal and non-current-carrying metal part	2,000 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN60947-5-1)
Rated insulation voltage (Ui)		150 V (EN60947-5-1)
Pollution degree (operating environment)		3 (EN60947-5-1)
Short-circuit protective device (SCPD)		10 A fuse type gI or gG (IEC60269)
Conditional short-circuit current		100 A (EN60947-5-1)
Conventional enclosed thermal current (Ithe)		5 A (EN60947-5-1)
Protection against electric shock		Class II (grounding not required with double insulation)
OFF reverse voltage		1,000 VAC max., 300 VDC max. (EN60947-5-1)
Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max.
Ambient operating temperature		-10°C to +80°C (with no icing)
Ambient operating humidity		35% to 95%RH
*Weight 3**		Approx. 62 to 72 g

Note: 1. The figures at the left are initial values.
2. The ratings at the left may vary depending on the model. Contact your OMRON representative for further
details.
*1. The head section of the plunger type SHL-D(Q)[][] is excluded.
*2. Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to
70%RH.
*3. The values are for the plunger-type models.

last update: January 21, 2022

Product Category

Switches
- Limit Switches
  - General-purpose Horizontal

Top of page