GD Series

* When using CC-Link IE Field, the support software cannot be connected. To connect the e support software, please switch to CC-Link IE TSN.
For details, please refer to the manual.

To use support software Wave Inspire Hub connect the IO-Link master unit to your PC.
Wave Inspire Hub can be downloaded for free from the URL below.
https://www.ia.omron.com/gd_tool/

Wave Inspire Hub is a setup support tool. Please note the following before use.
(1) OMRON assumes no responsibility for damage caused by any malfunctioning of this software, whether directly or indirectly, or caused by the effects of such malfunctioning.
(2) OMRON assumes no responsibility for any damage incurred by the customer due to use of this software.

For EtherNet/IP, required specification for the communications cables varies depending on the baud rate. For 100BASE-TX/10BASE-T, use a straight or cross STP (shielded twisted-pair) cable of category 5 or higher.

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m.
Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. Cable colors are available in yellow, green, and blue.

*1. We recommend you to use the above Cable and RJ45 Assembly Connector together.