E2MP

Valve Sensors

E2MP

Detect Whether a Valve Is Open or Closed by Mounting Directly on an Actuator

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: August 8, 2013

Item	E2MP-C Series	E2MP-CB1(-M1)	E2MP-CC1(-M1)	E2MP-CT1
Item	E2MP-S Series	E2MP-SB1(-M1)	E2MP-SC1(-M1)	E2MP-ST1
Output method		DC 3-wire PNP	DC 3-wire NPN	AC/DC 2-wire
Set distance		1 mm max.
Sensing object		E2MP-C Series: E2MP-CA[] E2MP-S Series: E2MP-SA[]		20 to 250 VAC (50/60 Hz), 10 to 300 VDC (including ripple (p-p): 10%)
Power supply voltage		10 to 30 VDC (including ripple (p-p): 10%)		---
Current consumption		15 mA max.		1.7mA max.
Leakage current		---		AC: 3 to 400 mA, DC: 3 to 300 mA
Control output	Switching capacity	Open-collector output 200mA max.		6 V max. (AC load current: 400 mA, DC load current: 300 mA, Cable length: 2 m)
Control output	Residual voltage	2 V max. with a 2-m cable and up to a 200 mA load current
Indicators		Operation indicator 1: Yellow Operation indicator 2: Red
Operation mode		NO (normally open) Refer to the timing charts with the I/O Circuit Diagrams for details.
Protection circuits		Load short-circuit protection, Power supply reverse polarity protection, Output reverse polarity protection		Load short-circuit protection
Ambient temperature		Operating: -25 to 70 (with no icing or condensation) Storage: -25 to 70 (with no icing or condensation)
Ambient humidity		Operating: 35% to 95% (with no condensation) Storage: 35% to 95% (with no condensation)
Insulation resistance		50 M min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min. between current- carrying parts and case		1,500 VAC, 50/60 Hz for 1 min. between current-carrying parts and case
Vibration resistance (destruction)		10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		300 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67
Connection method		Not indicated in model number: Pre-wired Models (Standard cable length: 2 m) Model number with -M1: M12 Connector Models		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)	C Series	Pre-wired Models: Approx. 170 g Connector Models: Approx. 90 g
Weight (packed state)	S Series	Pre-wired Models: Approx. 190 g Connector Models: Approx. 110 g
Materials		Case: PP, Display window: PA, Mounting screws and washers: Stainless steel, Cord: PVC (Pre-wired Models), Connectors: Brass nickel plated (Models with Connectors)
Accessories		Instruction Manual, screws (C Series: M15×12 two screws, S Series: M5×30 two screws, M5×30 two screws, two washers)

Target Puck

Model		Target Puck for E2MP-C Series			Target Puck for E2MP-S Series
Model		E2MP-CA1	E2MP-CA2	E2MP-CA3	E2MP-SA1	E2MP-SA2	E2MP-SA3
Specifications		Fully open or fully closed (0°: closed, 90°: open)	Fully open or fully closed, converted to NC (0°: closed, 90°: open)	Fully closed or intermediate opening (0°: closed, 0° to 90°: open)	Fully open or fully closed (0°: closed, 90°: open)
Applicable shaft size	Height	20 mm,30 mm		20 mm	20 mm	30 mm	30 mm
Applicable shaft size	Maximum diameter	30 mm			35 mm	50 mm	85 mm
Materials		Case: PP, Target: Stainless steel	Case: Aluminum	Case: PP, Target: Stainless steel	Case: PA, Target: Stainless steel
Weight (packed state)		Approx. 30 g	Approx. 65 g	Approx. 30 g	Approx. 45 g	Approx. 60 g	Approx. 100 g

last update: August 8, 2013

Product Category

Sensors
- Proximity Sensors
  - Discontinued
    - E2MP

Top of page