Industrial Automation

E3ZM-B

Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor

E3ZM-B

Excellent PET Bottle Detection

last update: April 25, 2013

Sensors

Sensing method	Appearance	Sensitivity adjustment	Connection method	Sensing distance	Model
Sensing method	Appearance	Sensitivity adjustment	Connection method	Sensing distance	Special reflector	NPN output	PNP output
Retroreflective with MSR function		Teaching type	Pre-wired (2 m)	500 mm [100 mm] * (Red light)	Order separately	E3ZM-B61 2M	E3ZM-B81 2M
			Connector (M8, 4 pins)		Order separately	E3ZM-B66	E3ZM-B86
			Pre-wired (2 m)		Included	E3ZM-B61-C 2M	E3ZM-B81-C 2M
			Connector (M8, 4 pins)		Included	E3ZM-B66-C	E3ZM-B86-C
		One-turn adjuster type	Pre-wired (2 m)		Order separately	E3ZM-B61T 2M	E3ZM-B81T 2M
			Connector (M8, 4 pins)		Order separately	E3ZM-B66T	E3ZM-B86T
			Pre-wired (2 m)		Included	E3ZM-B61T-C 2M	E3ZM-B81T-C 2M
			Connector (M8, 4 pins)		Included	E3ZM-B66T-C	E3ZM-B86T-C

* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Accessories

Special Retroreflective Reflector

(A Retroreflector is provided depending on the model number. Check the model number in the remarks column.)

Name	Model	E3ZM-B[]1(T)/-B[]6(T)	Quantity	Remarks
Name	Model	Sensing distance (rated)	Quantity	Remarks
Special Polarizing Reflector	E39-RP1	500 mm [100 mm] * (Red light)	1	A Reflector is provided with the E3ZM-B[][](T)-C. A Reflector is not provided with the Sensor.
	E39-RSP1	250 mm [0 mm] * (Red light)	1	A Reflector is not provided with the Sensor. The MSR function is enabled.
	E39-RP37	250 mm [0 mm] * (Red light)	1	A Reflector is not provided with the Sensor. The MSR function is enabled.

Note: Previous OMRON Retroreflective Reflectors (E39-R1/-R1S/-R2/-R3/-R9/-R10/-R1K/-RS1/-RS2/-RS3, etc.) cannot be used with the E3ZM-B.
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Mounting Brackets

A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.

Appearance	Model	Quantity	Remarks
	E39-L153 (SUS304) *1	1	Mounting Brackets
	E39-L104 (SUS304) *1	1	Mounting Brackets
	E39-L43 (SUS304) *2	1	Horizontal Mounting Bracket
	E39-L142 (SUS304) *2	1	Horizontal Protective Cover Bracket
	E39-L44 (SUS304)	1	Rear Mounting Bracket
	E39-L98 (SUS304) *2	1	Metal Protective Cover Bracket
	E39-L150 (SUS304)	1 set	(Sensor adjuster) Easily mounted to the aluminum frame rails of conveyors and easily adjusted. For vertical angle adjustment
	E39-L151 (SUS304)	1 set
	E39-L144 (SUS304) *2	1	Compact Protective Cover Bracket

Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size	Specifications	Appearance	Cable		Model
M8 (4 pins)	Standard	Straight *1	2 m	4-wire	XS3F-E421-402-A
		Straight *1	5 m		XS3F-E421-405-A
		L-shaped 1 2	2 m		XS3F-E422-402-A
		L-shaped 1 2	5 m		XS3F-E422-405-A

Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is make of SUS316L stainless steel, and the degree of protection is IP67 (IEC 60529).
When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

last update: April 25, 2013

Top of page

E3ZM-B

Excellent PET Bottle Detection

Sensors

Accessories

Special Retroreflective Reflector

Mounting Brackets

Sensor I/O Connectors (Sockets on One Cable End)

Product Category