Menu
Industrial Automation
E3ZM-B
Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor
Excellent PET Bottle Detection
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: June 15, 2016
| Sensing method | Retroreflective with P-opaquing and MSR functions | ||
|---|---|---|---|
| Model | NPN output | E3ZM-B61(-C)/-B66(-C) | E3ZM-B61T(-C)/-B66T(-C) (*2) |
| PNP output | E3ZM-B81(-C)/-B86(-C) | E3ZM-B81T(-C)/-B86T(-C) (*2) | |
| Sensing distance | 100 to 500 m m (Using E39-RP1) | ||
| Standard sensing object | 500-ml, transparent, round PET bottle (65-mm dia.) | ||
| Directional angle | Sensor: 3° to 10°
Reflector: 30° |
||
| Light source (wavelength) | Red LE D (650 nm) | ||
| Power supply voltage | 10 to 30 VDC, including 10% ripple (p-p) | ||
| Current consumption | 450 mW max. (current consumption for a
30-V power supply voltage: 15 mA max.) |
25 mA max. | |
| Control output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 2
V max.) Open-collector output (NPN/PNP output depending on model) |
||
| Operation mode | Light ON/Dark ON cable switch selectable | Light ON/Dark ON switch selectable | |
| Protection circuits | Reversed power supply polarity, Load short-circuit protection, Mutual interference
prevention, and Reversed output polarity protection |
||
| Response time | Operate or reset: 1 ms max. | ||
| Sensitivity adjustment | Teaching method | One-turn adjuster | |
| Ambient illumination | Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | ||
| Ambient temperature range | Operating: -40 to 60°C (*3 *4),
Storage: -40 to 70°C (with no icing or condensation) |
Operating: -25 to 55°C (*3),
Storage: -40 to 70°C (with no icing or condensation) |
|
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||
| Insulation resistance | 20 MΩ min. at 500 VDC | ||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
directions |
||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||
| Degree of protection *5 | IEC IP67, DIN 40050-9: IP69K | ||
| Connection method | Pre-wired cable (standard length: 2 m) or M8 4-pin connector | ||
| Indicators | Operation indicator (yellow), Stability indicator (green), and Teaching indicator (red) | ||
| Weight (packed state) | Pre-wired models: Approx. 85 g
Connector models: Approx. 35 g |
Pre-wired models (2-m cable): Approx. 70 g
Connector models: Approx. 20 g |
|
| Materials | Housing | SUS316L | |
| Lens | PMMA (polymethylmethacrylate) | ||
| Indication | PES (polyethersulfone) | PEI (Polyetherimide) | |
| Buttons | Fluoro rubber | ||
| Cable | PVC (polyvinyl chloride) | ||
| Accessories *6 | Instruction sheet, Special Reflector (E3ZM-B[][]-C only) | ||
*1. For information on the P-opaquing function, refer to Data Sheet.
*2. If a sensing object such as a glass plate is being used, the light reception level may not be attenuated sufficiently.
In the following cases, be sure to test operation sufficiently under actual operating conditions.
1) If the temperature varies more than 5°C
2) If the Sensor or Reflector moves due to vibration
*3.Do not bend the cable in temperatures of −25°C or lower.
*4. This value applies when an E39-RP1 Reflector is used.
The ambient operating temperature range when the E39-RSP1 or E39-RP37 is used is -25 to 55°C.
*5. IP69K Degree of Protection Specification
IP69K is a protection standard against high temperature and high-pressure water defined in the German standard DIN 40050, Part 9. The test piece is sprayed with water at 80°C at a water pressure of 80 to 100 BAR using a specified nozzle shape at a rate of 14 to 16 liters/min.
The distance between the test piece and nozzle is 10 to 15 cm, and water is sprayed horizontally for 30 seconds each at 0°, 30°, 60°, and 90° while rotating the test piece on a horizontal plane.
*6.Mounting Brackets must be ordered separately.
*2. If a sensing object such as a glass plate is being used, the light reception level may not be attenuated sufficiently.
In the following cases, be sure to test operation sufficiently under actual operating conditions.
1) If the temperature varies more than 5°C
2) If the Sensor or Reflector moves due to vibration
*3.Do not bend the cable in temperatures of −25°C or lower.
*4. This value applies when an E39-RP1 Reflector is used.
The ambient operating temperature range when the E39-RSP1 or E39-RP37 is used is -25 to 55°C.
*5. IP69K Degree of Protection Specification
IP69K is a protection standard against high temperature and high-pressure water defined in the German standard DIN 40050, Part 9. The test piece is sprayed with water at 80°C at a water pressure of 80 to 100 BAR using a specified nozzle shape at a rate of 14 to 16 liters/min.
The distance between the test piece and nozzle is 10 to 15 cm, and water is sprayed horizontally for 30 seconds each at 0°, 30°, 60°, and 90° while rotating the test piece on a horizontal plane.
*6.Mounting Brackets must be ordered separately.
last update: June 15, 2016
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.